Skip to content
Chimney Experts MN

Chimney Experts MN

Guardian Chimney Solutions

  • Chimney Minnesota
  • About
  • Blogs
    • Brick chimney Minnesota MN – The 5 Most Common Chimney Issues and How to Fix Them
    • Chimney Minnesota Services
    • Chimney Animal Removal and Sanitizing Delano MN
    • Chimney Animal Removal and Sanitizing Ramsey MN
    • Chimney Animal Removal and Sanitizing Rockford MN

Recent Posts

  • Chimney Inspections Woodland MN
  • Chimney Liner Installation
 Woodbury MN
  • Chimney Cleaning FAQs White Bear Lake MN
  • Chimney Cleaning FAQs Wayzata MN
  • Chimney Animal Removal and Sanitizing Vadnais Heights MN
  • Prefabricated Chimney Cleaning Twin Cities MN
  • Chimney Flue Cleaning Tonka Bay MN
  • Chimney Damper Installation
 Taylors Falls MN
  • Chimney Sweeping St. Paul MN
  • Chimney Flue Cleaning St. Michael MN
  • Crown Replacement
 St. Louis Park MN
  • Chimney Animal Removal and Sanitizing St. Francis MN
  • Top Mounted Energy Efficient Dampers Spring Lake Park MN
  • Chimney Cap Installation
 Shorewood MN
  • Fireplace Cleaning & Sweeping Shoreview MN
  • Fireplace Spark Arrestors
 Shakopee MN
  • Chimney Maintenance Savage MN
  • Factory Built Chimney Cleaning Roseville MN
  • Prefabricated Chimney Cleaning Rosemount MN
  • Chimney Maintenance Rogers MN
  • Chimney Animal Removal and Sanitizing Rockford MN
  • Chimney Restoration
 Robbinsdale MN
  • Fireplace Spark Arrestors
 Richfield MN
  • Chimney Restoration
 Red Wing MN
  • Chimney Animal Removal and Sanitizing Ramsey MN

Categories

  • Chimney Services MN
  • Sitemap
  • Contact
  • Privacy Policy
  • Chimney Services MN
  • Sitemap
  • Contact
  • Privacy Policy
  • Chimney Services MN
Sitemap

Tag: Chimney parts in Inver Grove Heights MN

Chimney Inspections Inver Grove Heights MN

Chimney Inspections Inver Grove Heights MN

This a tougher question than it sounds. The simple answer is: The National Fire Protection Association Standard 211 says, “Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary.” This is the national safety standard and is the correct way to approach the problem. It takes into account the fact that even if you don’t use your Chimney Inspections much, animals may build nests in the flue or there may be other types of deterioration that could make the chimney unsafe to use.
​
The Chimney Safety Institute of America recommends that open masonry fireplaces should be swept at 1/8″ of sooty buildup, and sooner if there is any glaze present in the system. This is considered to be enough fuel buildup to cause a chimney fire capable of damaging the chimney or spreading to the home. Factory-built fireplaces should be swept when any appreciable buildup occurs. The logic is that the deposit is quite acidic and can shorten the life of the fireplace. Chimney Inspections Inver Grove Heights MN 

Chimney Inspections Inver Grove Heights MN, fast, affordable & reliable

Chimney Restoration


Chimney Repair - The 5 Most Common Chimney Issues and How to Fix Them

There is nothing quite as comforting as a roaring fire on a cold winter day to warm your heart and your home. A fireplace is something your entire family can enjoy. But you need to make sure chimney repair and maintenance is done correctly in order to ensure your families safety. The Importance of Chimney Repair A chimney is designed to draw the smoke and gases produced by a fire up and safely out of your home. This is extremely important since some of these gases are dangerous. One of the most dangerous is carbon monoxide which in large enough doses can kill. A second important function of the chimney is to contain the excess heat from a fire until it can be vented to the outside air. Most of your home is combustible. If the chimney does not get this extremely hot air outside without leaks it can easily cause a fire in your home. This is why it is so important for you to make sure that any needed chimney repair is done correctly in order to keep you, your family and your home safe. Here are some important tips to ensure that your fireplace is working correctly and avoid some common chimney repair issues. Creosote Buildup Creosote is an oil that is produced when wood or other solids are set on fire. Over time the creosote can build up on the inside of your chimney. If there is too much buildup it can ignite and cause a fire in your chimney. Blockage Another common chimney repair issue is having a blockage in the flue of your chimney. This can be caused by debris from material dislodging in your chimney or even by animal nests. Blockages, even small ones affect the efficiency of your chimney in getting smoke, gases and heat out of your home. Cracks Or Holes In The Flue Some of the gases from a fire are quite corrosive and over time can damage your chimney flue and create the potential for blockages or even allow dangerous gases to seep into your home. Make sure that your flue gets an annual inspection to ensure that it is working correctly. Brickwork Problems Another problem is caused if the flue starts to leak and erode the masonry and brickwork around the exterior and require extensive chimney repair work. Too much of this can cause major structural damage which will make your chimney repair much more expensive. Chimney Cap and Chimney Crown The chimney cap and crown basically make up the roof of the chimney that surrounds the flue and keeps water and debris from getting into the chimney. If this is cracked or missing pieces it can allow water damage to the inside of the chimney and even damage the ability of the flue to channel gases and heat out of the home. This area also keeps animals, debris and weather out of your flue. Conclusion If you see any of these problems when you inspect your chimney, you need to see that any needed repair is made before the fireplace is used. While you may be able to fill small cracks, you should consult a professional for any larger issue. It is always recommended that you have your chimney cleaned, inspected and any needed chimney repair work done at least once a year to ensure its safe operation. To ensure the safety of your family make sure that you have carbon monoxide detectors in your home. These should be placed on each floor or at a minimum on the floor where your family sleeps. Check them regularly to make sure they are working properly to protect your family from even low levels of carbon monoxide. By taking care of any needed chimney repair as soon as you see it the costs for the repairs will be much less than if you let the problem get larger. Make sure that your chimney is inspected regularly and it will give you years of safe use.

Chimney Repair

Chimney Repair - The 5 Most Common Chimney Issues and How to Fix Them

There is nothing quite as comforting as a roaring fire on a cold winter day to warm your heart and your home. A fireplace is something your entire family can enjoy. But you need to make sure chimney repair and maintenance is done correctly in order to ensure your families safety. The Importance of Chimney Repair A chimney is designed to draw the smoke and gases produced by a fire up and safely out of your home. This is extremely important since some of these gases are dangerous. One of the most dangerous is carbon monoxide which in large enough doses can kill. A second important function of the chimney is to contain the excess heat from a fire until it can be vented to the outside air. Most of your home is combustible. If the chimney does not get this extremely hot air outside without leaks it can easily cause a fire in your home. This is why it is so important for you to make sure that any needed chimney repair is done correctly in order to keep you, your family and your home safe. Here are some important tips to ensure that your fireplace is working correctly and avoid some common chimney repair issues. Creosote Buildup Creosote is an oil that is produced when wood or other solids are set on fire. Over time the creosote can build up on the inside of your chimney. If there is too much buildup it can ignite and cause a fire in your chimney. Blockage Another common chimney repair issue is having a blockage in the flue of your chimney. This can be caused by debris from material dislodging in your chimney or even by animal nests. Blockages, even small ones affect the efficiency of your chimney in getting smoke, gases and heat out of your home. Cracks Or Holes In The Flue Some of the gases from a fire are quite corrosive and over time can damage your chimney flue and create the potential for blockages or even allow dangerous gases to seep into your home. Make sure that your flue gets an annual inspection to ensure that it is working correctly. Brickwork Problems Another problem is caused if the flue starts to leak and erode the masonry and brickwork around the exterior and require extensive chimney repair work. Too much of this can cause major structural damage which will make your chimney repair much more expensive. Chimney Cap and Chimney Crown The chimney cap and crown basically make up the roof of the chimney that surrounds the flue and keeps water and debris from getting into the chimney. If this is cracked or missing pieces it can allow water damage to the inside of the chimney and even damage the ability of the flue to channel gases and heat out of the home. This area also keeps animals, debris and weather out of your flue. Conclusion If you see any of these problems when you inspect your chimney, you need to see that any needed repair is made before the fireplace is used. While you may be able to fill small cracks, you should consult a professional for any larger issue. It is always recommended that you have your chimney cleaned, inspected and any needed chimney repair work done at least once a year to ensure its safe operation. To ensure the safety of your family make sure that you have carbon monoxide detectors in your home. These should be placed on each floor or at a minimum on the floor where your family sleeps. Check them regularly to make sure they are working properly to protect your family from even low levels of carbon monoxide. By taking care of any needed chimney repair as soon as you see it the costs for the repairs will be much less than if you let the problem get larger. Make sure that your chimney is inspected regularly and it will give you years of safe use.

Chimney Inspections Locally serviced and operated in Inver Grove Heights MN

Chimney parts

Diagnose Your Chimney's Leaking Problem

There is nothing quite as comforting as a roaring fire on a cold winter day to warm your heart and your home. A fireplace is something your entire family can enjoy. But you need to make sure chimney repair and maintenance is done correctly in order to ensure your families safety. The Importance of Chimney Repair A chimney is designed to draw the smoke and gases produced by a fire up and safely out of your home. This is extremely important since some of these gases are dangerous. One of the most dangerous is carbon monoxide which in large enough doses can kill. A second important function of the chimney is to contain the excess heat from a fire until it can be vented to the outside air. Most of your home is combustible. If the chimney does not get this extremely hot air outside without leaks it can easily cause a fire in your home. This is why it is so important for you to make sure that any needed chimney repair is done correctly in order to keep you, your family and your home safe. Here are some important tips to ensure that your fireplace is working correctly and avoid some common chimney repair issues. Creosote Buildup Creosote is an oil that is produced when wood or other solids are set on fire. Over time the creosote can build up on the inside of your chimney. If there is too much buildup it can ignite and cause a fire in your chimney. Blockage Another common chimney repair issue is having a blockage in the flue of your chimney. This can be caused by debris from material dislodging in your chimney or even by animal nests. Blockages, even small ones affect the efficiency of your chimney in getting smoke, gases and heat out of your home. Cracks Or Holes In The Flue Some of the gases from a fire are quite corrosive and over time can damage your chimney flue and create the potential for blockages or even allow dangerous gases to seep into your home. Make sure that your flue gets an annual inspection to ensure that it is working correctly. Brickwork Problems Another problem is caused if the flue starts to leak and erode the masonry and brickwork around the exterior and require extensive chimney repair work. Too much of this can cause major structural damage which will make your chimney repair much more expensive. Chimney Cap and Chimney Crown The chimney cap and crown basically make up the roof of the chimney that surrounds the flue and keeps water and debris from getting into the chimney. If this is cracked or missing pieces it can allow water damage to the inside of the chimney and even damage the ability of the flue to channel gases and heat out of the home. This area also keeps animals, debris and weather out of your flue. Conclusion If you see any of these problems when you inspect your chimney, you need to see that any needed repair is made before the fireplace is used. While you may be able to fill small cracks, you should consult a professional for any larger issue. It is always recommended that you have your chimney cleaned, inspected and any needed chimney repair work done at least once a year to ensure its safe operation. To ensure the safety of your family make sure that you have carbon monoxide detectors in your home. These should be placed on each floor or at a minimum on the floor where your family sleeps. Check them regularly to make sure they are working properly to protect your family from even low levels of carbon monoxide. By taking care of any needed chimney repair as soon as you see it the costs for the repairs will be much less than if you let the problem get larger. Make sure that your chimney is inspected regularly and it will give you years of safe use.
 
  • Gas fireplace chimney cap Edina MN – The 5 Most Common Chimney Issues and How to Fix Them
  • Wood burning stove chimney St. Michael MN – The 5 Most Common Chimney Issues and How to Fix Them
  • Chimney inspection Rockford MN – The 5 Most Common Chimney Issues and How to Fix Them
  • Wood stove chimney cleaning Shorewood MN – The 5 Most Common Chimney Issues and How to Fix Them
  • Chimney rain cap Edina MN – The 5 Most Common Chimney Issues and How to Fix Them

  • Chimney Inspections

    Chimney Services MN

    Posted on June 11, 2018June 11, 2018Tags Chimney cap in Inver Grove Heights MN [post_name], Chimney cleaning in Inver Grove Heights MN, Chimney in Inver Grove Heights MN, Chimney liner cost in Inver Grove Heights MN, Chimney liner kit in Inver Grove Heights MN, Chimney parts in Inver Grove Heights MN, Chimney pipe in Inver Grove Heights MN, Chimney pots in Inver Grove Heights MN, Chimney rain cap in Inver Grove Heights MN, Chimney repair in Inver Grove Heights MN, Chimney rock in Inver Grove Heights MN, Chimney sealer in Inver Grove Heights MN, Chimney spark arrestor in Inver Grove Heights MN, Chimney sweep in Inver Grove Heights MN, Chimney sweep log in Inver Grove Heights MN, Chimney tops in Inver Grove Heights MN, Clean sweep in Inver Grove Heights MN, Copper chimney caps in Inver Grove Heights MN, Electric chimney in Inver Grove Heights MN, Fireplace brick cleaner in Inver Grove Heights MN, Fireplace cleaning in Inver Grove Heights MN, Fireplace repair in Inver Grove Heights MN, Flue pipe in Inver Grove Heights MN, Outdoor chimney in Inver Grove Heights MN, Stainless steel chimney cap in Inver Grove Heights MN, Stainless steel chimney liner in Inver Grove Heights MN
    Proudly powered by WordPress